They are very suitable for more extensive aesthetic treatments, such as on the thighs, abdomen, hips and buttocks.
The pads are very easy to use.
First, it is necessary to apply elastic blue strips on the selected area of the body. We place wet deer pads for these strips, and connect them to a muscle stimulator.
Pads can be used on all muscle stimulators (Cefar-Compex, Sinkopa, Globus, Enraf-Nonius, Medikoel, Sport elect, …)
If your muscle stimulator does not have an output to the clip, you need an attachment to change the output. This will also save you a lot, as all the electrodes per piston are significantly cheaper.
CONNECTIONS and USE: They are made of conductive material and deer skin, which is soaked and squeezed and placed behind an elastic blue ribbon.
The yellow part of the pad is in contact with your skin. After the treatment, turn off the electrical stimulator and remove the pads and elastic bands. Carefully remove the cables from the pads. Dry the pads in the air (do not place them on heating surfaces). The yellow part of the pad should face up when drying.
Elastic blue ribbons come in a variety of lengths. Each strap has a fastening to the system on a velcro so that the length of the strap can be adjusted to the circumference of your body part.
The straps should be folded and the hinges fastened during storage and cleaning.
CLEANING: Disinfectants (component with ammonia 0.1 to 0.2%) should only be used to clean the product after cleaning with disinfectant use running water and rinse well.
WARNING !!! Before using the strips for the first time, clean them as described above. DO NOT USE DRY PADS !!
LIFE LIFE: The lifespan of the pads depends on the use and the way you handle it. It is estimated that this period is 6 months. It must not have any damage during the use of the pads, you must pay special attention to the parts where the electrodes are attached, so that only here there is no contact. If you notice any changes on the tapes, stop using it immediately!
STORAGE: Store pads at a temperature of 0 0C to 50 0C and relative humidity of 20% to 80%.
WARRANTY NOTICE: The product has been manufactured in accordance with regulations 93/42 / EEC and has been manufactured in accordance with FIAB Qualitiy System certified ISO 13485 procedures.